impact tester
英 [ˈɪmpækt ˈtestə(r)]
美 [ˈɪmpækt ˈtestər]
冲击试验机；撞撃试验机；冲辉验机
双语例句
- It indicated that the selection of sugarcane seedling could emphasize particularly on millable stalks and sugar content. Brinell impact hardness tester
说明有效茎数和甘蔗锤度对甘蔗实生苗的选择影响较大。锤击式布氏硬度试验机 - An impact abrasion tester based on mechanical change of fibers
基于力学性能变化的纤维冲击磨损测试仪 - Impact Abrasive Wear Resistance of New Type Martensitic Wear Resistant Steel rotary abrasive tester
新型马氏体耐磨钢的冲击磨料磨损性能旋转式磨料磨损试验机 - Brinell impact hardness tester Jeffrey swing-hammer crusher
锤击式布氏硬度试验机杰弗里型摇锤式破碎机 - Bolting mechanical properties are tested by the tensile strength tester, impact tester and hardness testers, to guarantee the detect precision.
连接副机械性能检测，采用微机控制的拉力机、冲击试验机及各种硬度计以保证测试精度。 - With Sharpy impact specimen, an experimental study was carried out on the dynamic fracture toughness K_ ( Id) of heavy rail steel using a pendulum impact tester.
采用夏比冲击试样，用摆锤式冲击试验机对重轨钢的动态断裂韧度K（Id）进行了试验研究。 - Study on Surface Strengthening of Aluminum Alloy Using Digital Impact Tester
用数字化冲击试验机研究铝合金的表面强化 - Several Problems in Development of Instrumented Impact Tester
电子测力冲击试验机研制中的几个问题 - The recommendable test parameters are sand slurry concentration 70wt% ( with middle sand), impact angle 30 ° and wear time 60 min. The results show that the tester can simulate the dredge conditions correctly.
推荐实验参数为：泥沙的质量分数70%、磨损面冲击角30°、磨损时间60min，采用中砂。 - Failure Analysis and Overhaul of JB-30 B Impact Tester
JB-30B型冲击试验机的故障分析与检修 - This paper presents the structural features and characteristics of the radial impact tester, torsional fatigue tester, rotary bending tester and radial load tester used for the tests.
本文介绍了用于该试验的径向冲击试验机、扭转疲劳试验机、旋转弯曲疲劳试验机和径向载荷疲劳试验机的结构形式及性能特点。 - Design of measurement and control system of an intelligent plastic impact strength tester
智能化塑料冲击韧性试验机测控系统设计 - An introduction to instrumented impact tester and its principle of operation is given in this paper.
介绍了仪器化冲击仪的实验装置及基本工作原理。 - Impact wear tests on tester MLD 10, single point impact test and ball on ball test have been carried out.
为此进行了MLD10的冲击磨损试验、单点冲击试验和落球试验。 - The temperature dependence of impact fracture toughness of phenolphthalein polyether ketone ( PEK-C) was studied by using an instrumented impact tester.
本文用仪器化冲击仪研究了酞侧基聚芳醚酮（PEK－C）的冲击断裂韧性对温度的依赖性。 - Introduces the design solutions of an intelligent plastic impact strength tester.
介绍一种塑料冲击强度试验机的工作原理及其智能化测控系统的软、硬件设计方案。 - The effect of varying mates on abrasive wear character of martensitic wear-resistant steel by MLD-10 type impact abrasion tester was investigated.
讨论了在动载三体磨粒磨损条件下，马氏体钢配副变化对磨粒磨损系统耐磨性的影响。 - Neural PID control of synchronous hoisting system for impact tester
冲击试验机同步提升系统的神经元PID控制 - Development of High-Speed Tensile Impact Tester
高速冲击拉伸试验装置的研制 - Impact strength of fusion butt welding joint of polyethylene pipes was tested with a digital impact tester, and some actual fusion welding cases were commented.
应用仪器化冲击试验机对聚乙烯热熔对接焊的冲击性能进行了测试，并对几种实际焊接情况进行了分析。 - Control and Measuring Device for JB-1 Type Impact Tester
JB&1型冲击试验机测控仪 - The dynamic tensile test was carried out on both DP and TRIP steel samples with strain rates in the range of 10~ 2~ 10~ 3 s~ (-1). A pneumatic indirect bar-bar tensile impact tester was employed in the present work.
采用气动式间接杆杆型冲击拉伸试验装置对TRIP钢和DP钢在102~103s-1应变率范围的动态拉伸变形行为进行了研究。 - Drop Weight Impact Tester for Measuring Parameters During Impacting ( 3) D shape. 12t Drop hammer test machine
可实现多参数测试的落锤式冲击试验机 - The influence of retained austenite in high chromium cast iron on impact fatigue wear was investigated by using MLD-10 Wear tester with an attached apparatus.
采用MLD－10磨损试验机及附加装置研究高铬铸铁中残余奥氏体对冲击疲劳磨损的影响。 - Nano-TiO_2/ POE/ PP composites were prepared via melt-blending process. The effects of nano-TiO_2 and POE on the rheological and mechanical properties were studied with rheometer, tensile tester and impact tester.
采用熔融共混挤出制得纳米TiO2/POE/PP复合材料，考察了纳米TiO2和POE对其流变性能和力学性能的影响，并对其机理进行了分析。 - The Role of Instrumented Impact Tester in Theoretical Research& Introduction to Instrument and Data Processing
仪器化冲击仪在理论研究中的作用&Ⅰ仪器简介及数据处理 - Researches were made on the impact wear properties of low carbon high steels with different carbon contents on simulated conditions by using a modified MLD-10 impact wear tester.
用改进的MLD-10型冲击腐蚀磨损试验机，在模拟工况条件下，对不同碳含量的新型衬板用低碳高合金钢冲击腐蚀磨损行为进行了比较； - As impact tester of desk type is only adapted to standard specimen and cannot fulfill impact test on large structure parts.
由于台式材料冲击试验机只适合于标准试片的冲击试验，无法满足复合材料结构件和部件试验的要求，故研究大型复合材料结构的冲击试验技术就具有一定的工程意义。 - The products were characterized by SEM and TGA et al. Mechanical property was also measured by Electronic Universal Material Testing Machine and impact tester.
通过扫描电镜、差热失重等仪器分对所制材料的结构与性能进行了表征，用电子万能材料试验机和冲击仪对所制材料的机械性能进行了测试。